Orchid light + humidity
Light, humidity and temperature on the windowsill, so you know when the orchids need shade or misting. From $49 in parts.
Parts
- ESP32-S3-DevKitC-1 (N8R8) C-001$19.95
- BME280 Temperature, Humidity and Pressure Sensor P-001$14.95
- BH1750 Ambient Light Sensor V-005$4.50
- 18650 Li-ion Battery, 2200 mAh E-001$9.95
- TP4056 Li-ion Charger Module E-004price pending
Parts from $49.35 (1 not priced yet) · powered by the 18650 Li-ion Battery, 2200 mAh
Wiring
The volts are the parts' own: the 18650 Li-ion Battery, 2200 mAh puts out 2.5–4.2 V, and the ESP32-S3-DevKitC-1 (N8R8)'s regulator makes the 3.251–3.349 V rail its GPIO and most of the sensors run from. Which header pin each lead lands on is our suggestion — the registry has no pin map, and nothing here has been wired on a bench.
Power the board off while you plug anything in. Every connector here is keyed: if it doesn't click in easily, turn it over rather than forcing it.
Readings
What this build sends: one column per channel its parts read or drive, with the unit the capability carries. The values and times below are sample data.
| Time | Light lxV-005 | Humidity %P-001 | Temp °CP-001 |
|---|---|---|---|
| 240 | 58 | 21.4 | |
| 265 | 59 | 21.5 | |
| 312 | 61 | 21.6 | |
| 420 | 62 | 21.8 | |
| 505 | 62 | 21.9 | |
| 561 | 63 | 22.0 |